What you'll need:
- New shower head and hose
- Adjustable wrench or pliers
- Teflon tape (plumber's tape)
- Cloth or towel
Step-by-step instructions:
- Check compatibility Ensure new shower head and hose match your existing setup size and type.
- Turn off water Make sure the tap/shower is not running before starting.
- Remove old components Wrap cloth around shower arm for protection, then use wrench to unscrew old shower head and detach old hose from both ends.
- Clean threads Use cloth to clean threads on shower arm, removing old Teflon tape or debris.
- Apply Teflon tape Wrap Teflon tape clockwise around shower arm threads to ensure watertight seal.
- Install new hose Screw one end of new hose onto shower arm and other end onto new shower head. Ensure connections are tight.
- Attach new shower head Hand-tighten shower head, then use wrench for additional quarter turn. Don't overtighten.
- Test installation Turn water back on and check for leaks. Adjust connections if necessary.
